Renz DTP 340 A Semi Automatic Punching and Stacking System

The DTP 340A dramatically increases your punching speed – as much as doubling the output. It is very economical because it improves the efficiency of the most expensive part of the punching system – the operator. Half of the motion involved in the punching process is eliminated by this system. This is an ideal solution for situations where you need additional output but have neither the budget nor the technical expertise to operate a fully automatic punching system.

Separating the sheets is the most expensive part a fully automatic machine. We have the operator separate the sheets which makes the process simple and economical. The layout of machine minimizes motion and encourages accurate punching. A paper holder mounts to the front of the machine in order to stage the paper in the correct position for maximum output.

Highlights:

  • Punching output approximately 1800 – 2000 cycles per hour
  • Maximum punching width 340 mm
  • Automatic or manual operation (with foot switch)
  • Formats: Punching Up to 13.5″
  • Fast, trouble-free die change (less than 2 min)
  • Vertical paper loading for most accurate punching
  • Electrically adjustable paper guide
  • Removable paper holder for unpunched paper
  • Adjustable paper output tray with front unloading of punched paper
  • Punching pins of the tools can be individually selected
  • Adjustable margin distance of the tools
  • Warranty: 1 Year Manufacturer Warranty

 

Rhin-O-Tuff Pal 14 Piks-A-Lift and APES Ejection and Stacking Modules

PAL 14 Piks-A-Lift

Just add it to your existing Rhin-O-Tuff punching system. Exciting! Revolutionary! Innovative! Terms that are once again being used to describe a new Rhin-O-Tuff product.

Attachable to any OD Series or HD Series Rhin-O-Tuff punch, the Pics-A-Lift will forever change the way you look at automatic punching systems. When used in combination with our APES-14 module, “hands on” punching control virtually eliminates mis-punched sheets, thereby allowing the numbered page jobs usually excluded from automatic punching. In our initial tests, the Pics-A-Lift / APES-14 combo has outperformed many of the fully automatic punches and has done so at less than one-half of their initial cost. The system offers flexibility enough to handle index tabs, clear covers, over-sized covers and paper sizes from 8.5″ X 5.5″ (140mm X 140mm) up to 8.5″ X 14″ (356mm x 356mm), both in landscape and portrait. Easy to set up and operate, your customers will appreciate the unbelievable productivity gains attainable with this new module.

APES -14

Make your HD Punch twice as productive by getting the new APES-14!
APES stands for Automatic Paper Ejector & Stacker module. It punches, ejects and stacks in one continuous operation. The APES-14-77 easily attaches to your HD 7700 and handles paper sizes from 51/2″ x 51/2″ up to 14″ X 14″ (140 x 140mm to 356 x 356mm).This is the same machine as the APES-14 except that it attaches to the HD 7700. For the occasional job that it can’t handle you can use your HD Punch in standard mode while the APES-14-77 is still attached.

Click here to see videos of these products

 

James Burn Lhermite DocuPunch Automatic Punching System

The James Burns Lhermite DocuPunch is ideal for accurate mid-volume punching on
demand. This high-speed automatic punch is capable of producing as many as 30,000 punched sheets per hour. The DocuPunch can be used to punch preprinted, collated documents directly from your copier or printer (including mixed stocks from 16 lb. bond to 110 lb. index). It can also be used to punch tabs that are pre-collated into the finished sets.

The DocuPunch is designed with the On-Demand market in mind… It offers setup time of less than a minute, die changes in seconds and hands free operation so your operator is free to perform other tasks. Plus, the DocuPunch has an incredibly small footprint and heavy-duty casters, the DocuPunch is assured to fit even in the tightest of space requirements. In fact, the Docu-Punch Automatic Document Punch is as easy to use as an office photocopier.

This versatile, ergonomically designed time-saver offers hands-free low to mid-volume punching of pre-collated books, presentations, reports… even tabbed sheets… in a free-standing unit that makes quick, light work of your diverse punching needs. Simply load the tray, push a button and walk away. The Docu-Punch accurately punches a wide range of materials and sizes, operated by a simple touch key control panel featuring positive sheet pickup and 3-sided punching registration , for perfect holes every time, kept in perfect pre-collated order. With speeds of up to 30,000 sheets per hour, a wide assortment of die patterns available, and super fast changeover times, the Docu-punch is the perfect companion to midvolume plastic comb, Double-O wire and Spiral coil document finishing solutions in central reproduction departments and digital/on-demand printers where efficiency and productivity are a must.

Highlights:

  • Very Fast – Punches up to 30,000 sheets per hour of clean, perfect holes for finishing (depending on paper and allowing for reload).
  • Versatile – Punches wide variety of paper stocks and covers…even tabbed sheets…in virtually any size from 5-1/2″ x 5-1/2″ up to 13″ x 12″… kept in perfect pre-collated order.
  • Easy to Use – Hands-free operation. Simply load the tray, push a button and walk away. No special training or personnel required.
  • Simple Formatting – Electronically controlled from user-friendly Touch Key Control Panel.
  • Unique Paper Handling – Positive sheet pickup with beak, and 3-sided jogger for perfect punching registration.
  • Ergonomically Styled – Allows all operations, including punch die changes, to be performed quickly and easily from the front of the
    machine. Incorporates integral storage space for three tools.
  • Tools Available - Wide choice of round and square hole punching dies including: Double-O Wire, Plastic Coil, plastic comb’ Velobind®’ 2, 3, & 4 ring binder; etc.
  • Safety & Auto-Stop – Built-in facilities to help avoid paper jams and increase safety.
  • Compact – Benefits from a very small footprint without compromising on power and quality.
  • Installation – Lockable caster wheels allow quick and easy machine placement.
  • Voltage Requirements - Quiet 110v Single Phase 60 Hz. No air required.
  • Dimensions - 46″ H x 51″ W x 28″ D
  • Shipping Weight- Approx. 745 lbs.
  • Warranty: 1 Year Manufacturer Warranty on Parts, 90 Days on Labor

 

James Burn Lhermite Alpha-Doc® MKIII Automatic Punching System

The ALPHA-DOC® MKIII provides large volume hands-free pre-collated punching. High-speed automatic punch capable of producing 30,000 to 40,000 punched sheets per hour. Punches preprinted, collated documents directly from your copier or printer (including mixed stocks from 16 lb. bond to 110 lb. index). Also punches tabs pre-collated into the finished sets. Tabs must have minimum 1/4″ extension. Hands free operation means your operator is free to perform other tasks. Large selection of punch dies available.

The remarkable ALPHA-DOC® MKIII combines the versatility and ease of an office machine with the speed and efficiency of an automatic punch — for perfect holes every time. Simply load the tray, push a button and walk away for hands-free punching of pre-collated books, presentations, proposals, reports… and even tabbed sheets. The ALPHA-DOC® MKIII punches a wide variety of material in virtually any size from 5-1/2″ x 5-1/2″ up to 13″ x 13″. Our simplified paper path and unique turnover device with receding stacker provide low waste and assures that pages are kept in perfect pre-collated order. With speeds of up to 48,000 sheets per hour, a wide assortment of die patterns available, and super fast changeover times, the ALPHA-DOC® will “punch-up” your document binding productivity without “punching holes” in your document finishing budget.

Highlights:

  • Super Fast – Your productivity will markedly improve with 2 punching speeds of 70 & 80 strokes/minute — up to 48,000 sheets/hr.
  • Versatile – Punches wide variety of paper stocks and covers…even tabbed sheets…in virtually any size from 5-1/2″ x 5-1/2″ up to 13″ x 13″.
  • Versatile – Punches wide variety of paper stocks and covers…even tabbed sheets…in virtually any size from 5-1/2″ x 5-1/2″ up to 13″ x 13″.
  • Simple Formatting – Electronically controlled from user-friendly ‘Touch Key’ pad. Pre-set standard paper sizes changeover in 2 minutes. Hardened steel dies changeover in 5 minutes.
  • Top Feed Sheet Pickup – Variable 5 to 10 sheets of 20# Bond with large capacity feeder of up to 14-1/2″ pile.
  • Retractable Pins – Eliminates “nicking” at edge of sheets, producing clean, perfect holes for binding
  • Unique Turnover Device – Keeps pre-collated document pages in perfect order, with receding stacker.
  • Tabbing Device – Punches all standard tab-cut sheets.
  • Tools Available – Wide choice of round and square hole punching dies including: Double-O wire, Plastic Coil, Plastic comb, Velobind, 2, 3, & 4 ring binder; spiral; etc.
  • Air-Blow Option – Optional air valve attachment helps separate sheets with static buildup. Air not supplied.
  • Installation – Caster wheels allow quick and easy machine placement.
  • Voltage Requirements – Quiet 110v single phase 60 Hz. No air required.
  • Dimensions – 46″ H x 72″ W x 28″ D, with turnover device
  • Weight – 650 lbs. unpacked
  • Warranty: 1 Year Manufacturer Warranty on Parts, 90 Days on Labor

 

Renz AutoPunch 360 Automatic Punching System

Automatic punch with fully automatic or manual format changeover for all punching patterns used with loose leaf binding systems and specialized hole patterns.

Each RENZ high speed punching machine is the result of numerous technical innovations and considerable practical experience. Several ideas from users were also incorporated into the design of the AP 360 to create a high performance punching machine that delivers new levels of performance and economy.

Highlights:

  • Continuous paper feed automatically separates the sheets, punches, and reassembles the book in the original sequence
  • No tools are needed to set the format
  • Very fast change of punching dies
  • Large selection of punching dies including wire, plastic comb and plastic coil binding. for greatest flexibility and fastest format changes use our optional QSA Dies (Quick Size Adjustment)
  • Mounted on wheels for easy transport
  • Compact profile fits through standard doorways
  • Can be equipped for either continuous or cycled operation