Fujipla ALM 3220 Fully Automated Laminating System

The ALM3220 is a breakthrough in laminating technology. Laminating has never been so fast and easy. Fujipla’s
revolutionary compact auto laminator is as easy to use as a copy machine and warms up in 5 minutes. Just load from 1 to 200 documents in the automatic feeder and press the start button. Each document is automatically fed into the laminator, laminated with the special lamination film, trimmed to size and then stacked on the collection tray. The ALM3220 can adjust to different size documents up to 12” x 18” and can adjusted to trim with or without a margin. The special AL laminating film comes in 1.5, 3 or 5 mil
thickness in gloss or matte finish.

Features:

  • Fully Automatic Laminating Machine
  • Automatic Feeder
  • Automatic Lamination
  • Automatic Trimming
  • Automatic Stacking

Download and View Product Information PDF

 

 

PLUSTER PLS3311   Automatic
Single Sided Laminator

A Revolutionary Breakthrough in Lamination Technology!

  • Mid-Range Single-Side Laminator
  • Fully Automatic – Feed, Laminate, and Separate with minimal operator involvement
  • Perfect system for moderate volume and finishing of digitally printed sheets
  • Sppeds up to 10 feet per minute
  • Sheet widths up to 14″
  • Sheet lengths up to 20″
  • Perfect for standard digital sheet sizes of 11×17, 12×18, 13×19, and 14×20
  • Feeder holds up to 300 sheets
  • Separator system is a flying knife allowing use of both OPP and Nylon based laminating films
  • Built-in decurling device allows creation of perfectly flat one-sided laminated sheets, even negative direction curl can be created

Pluster PLS3312 Automatic Single Sided Laminator

Table Top Short Run Solution

  • Compact desktop single-sided laminator
  • Fully automatic-feed, laminate, and separate with minimal operator involvement
  • Perfect for short-run, on-demand, single side lamination of printed sheets
  • Feeder holds up to 25 sheets. Since sheets feed from bottom of stack, additional sheets can be added as the unit is running
  • Unique separator system ensures sheet separation with consistency
  • Uses standard 110V power
  • Optional rolling stand available
  • A.S.A.P laminating films ensure adhesion to various types of print including toner-based digital prints
  • Handles sheet widths as narrow as 10-3/4″ – maximum sheet width of 13-3/4″
  • Handles sheet lengths as short as 11-3/4″ – maximum sheet length of 19-5/8″. Perfect for 11×17, 12×18, and 13×19

 

 

TR-1200 13″ Automatic Film Trimmer

Works with any Roll Laminator!

The TR-1200 Autocutter is the perfect companion to any laminator using integrated side slitters. The TR-1200 Autocutter trims the leading and trailing edges of the sheet giving you a completely finished product. The Tr-1200 will run behind any lamination system to automatically and uniformly cut the leading and trailing edges of the sheets being laminated. Do not be fooled by its small size, this system is loaded with features. The cutting margin can be adjusted to cut completely flush, leave a uniform border of film, or even a negative cut into the laminated sheet. The leading and trailing edge cuts are independently controllable meaning you can flush cut the leading edge while leaving a larger trailing edge margin if desired. Larger margins are perfect for creating a tough laminated binding edge, or flush trim for precision accuracy.

  • Throughput speeds in excess of 30 sheets per minute on 11×17 sheet
  • Cuts 1.2 mil to 10 mil laminates
  • Digital microprocessor controlled
  • Large LCD touch screen display
  • Intuitive user adjustable settings
  • Precise settings to .005
  • Rotary self-sharpening blade
  • Magnetic outfeed guides

 

LEDCO Automatic Sheet Feeder

The LEDCO Automatic Sheet Feeder is Designed to:

  • Designed for use with the LEDCO HS30” Thoroughbred Laminator
  • Designed for use with the LEDCO HS30” Automatic Cutter.
  • Provide increased production over hand-feeding in high volume production runs.
  • 220V/60 Hz, single phase, 20 amps

Standard Features

  • Motorized pile table (maximum pile height 25.75”)
  • Maximum sheet size (without extension table) 29 3/8” x 25.25”. With optional table extension, maximum sheet size is 29 3/8″ X 40″
  • Side register for feed guidance
  • Easy-to-use on/off controls, speed adjustment, and on/off for suction roll and belt-drive controls
  • On casters for easy movement

 

LEDCO Automatic Film Cutter

The Automatic Cutter was designed as one part of LEDCO’s High Speed System. It can also be used with other manufacturers’ equipment. This cutter’s fiber optic sensor precisely activates the shearing blade on the leading and trailing edges of each sheet.

  • Designed for use with the LEDCO HS30” Thoroughbred Laminator.
  • Will adapt to fit with other similar equipment.
  • Increase productivity over hand-cutting.
  • 115V, 12 amp (220 optional)
  • Modular design allows use with most thermal laminating equipment

Standard Features

  • Variable speed up to 150 feet per minute
  • Speed can be adjusted during operation
  • Feed table support for precise guidance of web
  • Two-sided cutting blades(for twice the life)
  • Self-sharpening shear cutting blades
  • Maximum cutting thickness up to 50 mils
  • Cuts up to 30″ wide
  • Casters