Drytac Hot Press™ Heated Glass Top Vacuum Dry Mounting Press
The Hot Press™ Heated Glass-Top Vacuum Presses handles a wide range of presentation materials from foam board and wood to photos, art prints and delicate fabrics and is well regarded by picture-framers, photolabs, digital service bureaus and other finishing professionals for their ability to produce a very even spread of heat across the work surface, leading to a superior quality of surface finish.
- All models feature an automatic electronic timer with a manual override switch and vacuum pressure adjustment capabilities. Upon completion of the cycle, vacuum pressure is automatically released and the timer resets itself.
- The top panel of the Heated Glass Top Vacuum Press is made up of two sheets of reinforced tempered glass.
- The inner surface of the lower sheet has an invisible conductive film embedded in it. A controlled electric current is passed through this conductive film creating a highly efficient heating system.
- A sensor on the glass monitors and controls the temperature by means of a digital thermostat. The glass is extremely smooth and scratch resistant.
- The transparent top panel allows the operator to view materials during processing and correct mis-aligned work or folded back corners.
Three Models Available:
- HGP260 – 975mm x 1300mm (39″ x 51″)
- HGP360 – 1194mm x 1800mm (47″ x 71″)
- HGP560 – 1422mm x 2615mm (56″ x 103″) (Stand Included with this model)
Diaphragm Working Area:*
- HGP260 – 35 in. x 47 in. (890mm x 1194mm)
- HGP360 – 1080mm x 1689mm (42.5″ x 66.5 “)
- HGP560 – 1276mm x 2496mm (50.25 in. x 98.25 in.)
Voltage all models 220V Single Phase 50/60Hz