LEDCO Premier 4 25″ Roll Thermal Laminator


The Premier 4 is designed to:

  • Laminate using films up to 10 mils thick and up to 25 inches wide
  • Provide variable-speed operation from 0 to 10 feet per minute
  • Operates on 110 volts, 15 amps. 220 volt operation available
  • Reduce maintenance. Rollers and other key parts can be changed quickly without disassembling the side frame

Standard Features

  • Swing-away top heater makes the laminating roll easy to clean.
  • Variable-speed operation to properly laminate thicker films at slower speeds than with thin films
  • Digital temperature display makes it easy to set and maintain the proper lamination temperature
  • Glitch-proof threading with the top idler guarded for easy threading. The bottom idler, attached to the feed tray, threads the film when put on the machine.
  • Pressure release control makes it easier to clear film and allows the rollers to turn during warm-up
  • Slitters remove the side scrap from both sides of each sheet as it moves through the laminator

Options

  • Roll-feed kit for simplifying the lamination of long images.
  • Footage counter to measure film usage in feet.
  • Dust cover to keep the machine clean when not in use.
  • Stand

 

LEDCO Professor 27″ Roll Thermal Laminator

The Professor Laminator is designed to:

  • Laminate using films up to 10 mils thick and 27 inches wide
  • Operate on 110 volts, 1560 watts, 15amps
  • Provide variable speed operation from 0 – 15 feet per minute
  • Process roll film
  • Process pouches
  • Process mounting boards
  • Simultaneously mount and laminate

Standard Features

  • Self-threading feature for easier loading of film.
  • Dual function versatility (laminating and mounting up to 3/16”)
  • Reverse switch to clear wrap-arounds or back out materials
  • Adjustable temperature control allows use of film up to 10 mils thick
  • Adjustable temperature control allows use of a variety of mounting materials
  • Forced air cooling allows laminating with thicker films
  • Hot roll design
  • Clear safety shield so operators can see their work

Options

  • Roll Feed Kit For use when laminating very long items such as banners. Especially helpful for owners of poster printers, plotters, banner makers, and other digital output
  • Stand

 

LEDCO Industrial Series Workhorse HD 25 Laminator with Stand

The HD 25 Laminator is designed to:

  • Provide years of service with minimum maintenance
  • Laminate using films up to 10 mils thick, up to 25-inches wide, and at speeds up to 25 feet per minute
  • Operates on 220 volts, 20 amps

Standard Features

  • Intelligent heat controllers anticipate the heat demand for each job to maintain a set temperature
  • Variable-speed operation for proper lamination of thicker films at slower speeds
  • Removable heat shoes are easily unplugged and removed to clean or replace the laminating rollers Upper and lower rollers are driven to minimize material wrinkling or curling
  • Pull rolls can be used as laminating rolls if the laminating rolls become damaged
  • Pressure release control makes it easier to clear film and allows the rollers to turn during warm-up
  • Retractable slitters remove the side scrap from both sides of each sheet as it moves through the laminator
  • 18” extension bars
  • Upper fan assembly provides additional cooling to run thicker films at higher speeds

Options

  • Release liner take-up facilitates the removal of release liner when using pressure-sensitive films
  • Casters
  • Extra slitter heads
  • Additional mandrels
  • Footage counter

 

LEDCO HS 30 Thoroughbred High Speed Laminator with Stand

The Thoroughbred is designed for high speed, cost effective lamination performance:

  • Laminates materials up to 30 inches wide
  • Provides variable-speed operation from zero to 65 feet per minute
  • Laminates using films up to 10 mils thick

Standard Features

  • Intelligent heat controllers display both the set and actual temperatures. Laminating and pull rollers feature superior release quality, high lamination quality, and easy cleaning
  • Built-in retractable slitters reduce cutting time by trimming side scrap away during the lamination process
  • Dual tension knobs for each supply roll mandrel make film tension adjustments easy and accurate
  • A safety guard built into the top heat shoe and enclosed rear rollers prevent operator injuries
  • Upper and lower rollers are power driven to minimize wrinkling or curling
  • Forced air cooling with a built-in chill roll system provides the proper contact cooling required for high-speed lamination
  • Precision feed tray has left and right side guides for accurate feeding

Options

 

LEDCO Industrial Series HD 38″ & HD 60″ Laminators with Stand

Ledco Industrial Series Laminators are designed to:

  • Provide years of service with minimum maintenance.
  • Laminate using films up to 10 mils thick.
  • Operates on 220 volts, 50 amps for 60″, 40 amps for 38″.

Standard Features

  • Intelligent heat controllers anticipate the heat demand for each job to maintain a set temperature.
  • Variable-speed operation for proper lamination of thicker films at slower speeds
  • Removable heat shoes are easily unplugged and removed to clean or replace the laminating rollers
  • Upper and lower rollers are driven to minimize material wrinkling or curling
  • Pull rolls can be used as laminating rolls if the laminating rolls become damaged
  • Retractable slitters remove the side scrap from both sides of each sheet as it moves through the laminator
  • Upper fan assembly provides additional cooling to run thicker films at higher speeds.
  • Pneumatic roll pressure from integrated compressor allows precise, variable and independent nip pressure

Options

  • Casters
  • Extra slitter heads
  • Additional mandrels
  • Footage counter
  • Roll feed assembly for feeding rolls of images