Wide Format Punch Machines

Rhin-O-Tuff HD 7700 Horizontal 24″ Interchangeable Die Punch Machine

The HD-7500 Horizontal is a 24 inch (610 mm) open-ended punch for calendar and other applications. It features the patented “quick change” die system for changing punch patterns in 30 seconds; no tools required and no bolts or screws to replace or misplace. There is Built-In Die Storage to conveniently store up to two 24”/610MM Dies Behind the HD-7500H. It has a Pull-Out Extension Table for larger size jobs which reduces overall foot print when not in use.

The HD-7500 Horizontal was designed with the operator in mind, offering quick, easy set-up including easy pin pulls and pre-set paper stop positions. The machine comes with twin motors, giving you plenty of power for those difficult jobs. Add a full year’s warranty for both machine and the dies and it’s a real tough Rhino.

Features:

• Pull-Out Extension Table: For larger size jobs. Reduces Overall Foot Print when not in use.
• Patented Quick Change Die System “QCDS”: NoTools, Nothing to Take Apart Can use current 24”/610MM dies from standard HD-7500 Vertical Punch).
• 24”/610MM Open Ended Punching: Allows for Wider Applications.
• 90 Cycles Per Minute
• Rated up to 40 Sheets or Up to 80 Pages of 20 lb. or 80gsm. The Number of Sheets Depends on the Paper Weight and Punch Pattern Used (15,000 to 18,000 Sheets per Hour).
• EXTRA HIGH Capacity Chip Tray. Large Slide-Out Container. Never Worry About Over-fills.
• Smooth, Quiet, Power on Demand Operation.
• All Punch Pins Easily Disengage: With No Tools Required, Pins can be replaced by the User for Reduced Maintenance Costs.
• Built-In Die Storage: Conveniently Store up to Two 24”/610MM Dies Behind the HD-7500H. At Last! A Place to Store Your Extra Punch Tools
• 1 Year Limited Warranty

Renz Super 700 28″ Heavy Duty Punch Machine 

Heavy duty machine for continuous punching, perforating and grooving up to 700 mm (28″) punching width.

Easily operated by a foot switch. Can be operated while sitting or standing.

Horizontal paper insertion guarantees punching accuracy on wide formats.

This design allows grooving and tear-off perforation.

Quick and easy die change in just a few minutes.

Punching dies for wire comb binding, plastic and spiral binding are available in QSA execution (QSA quick size adjustment = quick cancellation of punch pins). Therefore it is not necessary to remove the die for format changes.

Due to the wide punching width, 2 part dies can be used allowing punching of books and calendars. Therefore, the investment of a second die is saved.

Significantly, the machine can be configured with two 350 mm dies side by side; one in 3:1 pitch and one in 2:1 pitch therefore negating the need to die change when moving between pitches.

Continuous height adjustment for reground dies, up to 15 mm max.

The proven design guarantees a long life span.

Features:

• Heavy duty machine for continuous work.
• Fast and easy changing of punching dies in just a few minutes.
• Punching dies of most competitive manufacturer can be used by changing the mounting adapter.
• Fast format setting with QSA dies.
• Designed for large formats such as calenars, flip charts and oversize books
• “Made in Germany”

Technical Data:

• Working width:   700 mm (28″)
• Format range punched side:   max. 700 mm (28″)
• Format range unpunched side:   min. 60 mm (2,4″)
• Punching thickness:   max. 4,5 mm (depends on the die)
• Punching speed:   400 – 500 strokes/h (depends on the operator)
• Paper feed:   horizontal
• Grammage:   40 – 1000 gr./m²
• Index cut:   yes
• Exchangeable dies:   yes
• Change of dies:   only a few minutes
• Change of format:   punching pins can be deselected for fastest possible change of format
• Variable margin clearance:   yes
• Deselectable punching pins:   yes
• Adjustable eccentric shafts:   yes
• Machine: Lenght x Width x Height:   900 x 850 x 1100 mm (35,5 x 33,5 x 43,3″)
• Weight: net / gross:   380 kg / 836 lbs.
• Electrical connection:   230/400 V / 50 Hz / 2,2 kW

Renz Super 900 35.5″ Wide Heavy Duty Punch Machine 

Heavy duty machine for continuous punching, perforating and grooving up to 900 mm (35.5″) punching width.

Easily operated by a foot switch. Can be operated while sitting or standing.

Horizontal paper insertion guarantees punching accuracy on wide formats.

This design allows grooving and tear-off perforation.

Quick and easy die change in just a few minutes.

Punching dies for wire comb binding, plastic and spiral binding are available in QSA execution (QSA quick size adjustment = quick cancellation of punch pins). Therefore it is not necessary to remove the die for format changes.

Due to the wide punching width, 2 part dies can be used allowing punching of books and calendars. Therefore, the investment of a second die is saved.

Significantly, the machine can be configured with two 350 mm dies side by side; one in 3:1 pitch and one in 2:1 pitch therefore negating the need to die change when moving between pitches.

Continuous height adjustment for reground dies, up to 15 mm max.

The proven design guarantees a long life span.

Features:

• Heavy duty machine for continuous work.
• Fast and easy changing of punching dies in just a few minutes.
• Punching dies of most competitive manufacturer can be used by changing the mounting adapter.
• Fast format setting with QSA dies.
• Designed for large formats such as calenars, flip charts and oversize books
• “Made in Germany”

Technical Data:

• Working width:   900 mm (35.5″)
• Format range punched side:   max. 900 mm (35.5″)
• Format range unpunched side:   min. 60 mm (2,4″)
• Punching thickness:   max. 4,5 mm (depends on the die)
• Punching speed:   400 – 500 strokes/h (depends on the operator)
• Paper feed:   horizontal
• Grammage:   40 – 1000 gr./m²
• Index cut:   yes
• Exchangeable dies:   yes
• Change of dies:   only a few minutes
• Change of format:   punching pins can be deselected for fastest possible change of format
• Variable margin clearance:   yes
• Deselectable punching pins:   yes
• Adjustable eccentric shafts:   yes
• Machine: Lenght x Width x Height:   1200 x 850 x 1100 mm (47x 33 x 43,3″)
• Weight: net / gross:   550kg / 1210lbs
• Electrical connection:   230/400 V / 50 Hz / 2,2 kW